UNIQUE 3000
pH / ORP / CONDUCTIVITY
/ RESISTIVITY
INDICATOR / CONTROLLER / TRANSMITTER
The most econimical & versatile process indicator / controller / transmitter with most advanced technology, offering many features found only on larger, higher priced unites. This provides accurate measurement and control of process variables.
FEATURES
:
Advanced Microcontroller based design
Very compact size in panel & field version
Easy front key callibration & other settings
Multi parameter display by a key press
LED indication for relay status
Error code for self diagnostics
Programmable 2 isolated Relay outputs
Galvanic isolated mA output
Data interface with PC through RS 232 / 485
Pass code provision for authorised settings
4 digit, 14 mm high intensity RED LED display
Bench Top pH Analyser - Marvel 5000
Most economical, versatile reliable & asthetical pH Analyser.
FEATURES : Microcontroller based Hi-Tech designed product Error code for self diagnostics Data interface with PC via RS 232 (optional) Galvanic isolated mA / mV output (optional) Isolated relay output & programmable as per application (optional) Auto / Manual temperature compensation High low alarm indication through LED & mute facility (Alarm buzzer optional) ORP (REDOX) measurement possible Millivolt, temperature measurement with key press
PORTABLE DIGITAL pH METER - WE 98
FEATURES
:
Manual 2 point calibration at any
Buffer value ( 4 & 7 pH OR 7 & 10 pH)
Indespensable tool for all industries
Better resolution 0.01 pH & range 0 to 14.00 pH
Small, light, rugged and battery operated
Quick response
ABS housing
Data hold facility
Easy buffer standardisation on front panel
Technical
Specifications :
Sensor : Non-breakable epoxy body gelfilled combined pH electrode.
Range : 0-14.00 pH
Resolution : 0.01 pH
Accuracy : 0.02 pH
Display : 3 and 1/2 digits (0.5" height) liquid crystal display
(with polarity and over range indication)
Hold (Option) : Press of HOLD switch, desired reading is locked &
display starting shows :
Temp. Compensation : Fixed at Buffer solution temp. optional automatic
compensation.
Battery : Single 9 volt transistory battery. Everady PP9 or HW 6F 22
(very easy to replace and very low consumption)
Weak Battery Indication : "BAT" indication on display
Operating Environment : 0 to 50°C, 80% Rh. (max.)
Dimensions : 100 (L) x 24 (H) x 65 (W) mm
Weight : 100 gms. (approx.)
Sensor open : -1 on display
Enclosure : Rexin black colour pouch with sensor compartment
ELECTROLYTIC CONDUCTIVITY INDICATOR / TRANSMITTER - Model 9000P
Technical
Specifications : (INSTRUMENT)
Display : LCD display 3 1/2 digit (12.5 mm height)
Available Ranges :
1.0 - 19.99 & 0 - 199.9 µS/cm
2.0 - 199.9 & 0 - 1999 µS/cm
3.0 - 1999 & 0 - 19.99 mS/cm
Total dissolved solutions (TDS) :
0 -12 ppm & 0 - 120 ppm
0 - 120 ppm & 0 - 1200 ppm
0 - 1200 ppm & 0 - 12000 ppm
Temperature Compensation :
(ATC) auto temp. compensation : - 5 to 100°C Pt 100 RTD
Temperature Coefficient : 2% / °C
ATC reference temp. : 25°C
Analog Output : 4-20 mA (0-20 mA optional) nonisolated, 500 ohms max. load.
Electrical performace :
Sensitivity : 0.1% of full scale
Stability : 0.025% of full scale per day noncummulative.
Repeatability : 0.02 % of full scale
Power : 230 VAC ±15%, 50Hz
Cable Length : Sensor to analyser 10 mtrs. max.
Mechanical Enclosure :
Electrical connection : PG7 x 2 & PG 3 x 1
Enclosure : Nema4 IP 65. Polycarbonate enclosure (Alluminium coating
optional)
Size : 120 x 80 x 50 mm Weight : 0.7 kg.
Panal type : 96x96x150 mm ABS Wt : 0.7 kg.
SENSOR
: With K=0.1, 1.0 & 10.0 Cell constant.
1. Conductivity immersion probe (SS BOdy) : Length 90 mm, 500 mm. 1000 &
1500 mm. Pressure 200 PSI & temp. 150°C, 3/4" /1" BSP/NPT(M)
2. Flow through probe ABB Epoxybody 1/2" BSP(F) 3/4" BSPT monted
in s/s T. Pressure 100 PSI & temp. 90°C