GENERAL SPECIFICATIONS
Ac Input 170-270 VAC 50 Hz Single Phase.
Line Regn. Better than 1%.
Load Regn. Better than 1%.
Ripple : Both low and high freq. rippple 1% p-p/50 mV.
HF Noise 1% or 100 mV whichever is less.
Transient Response O/P returns to within 1% in less than 1msec for 50% step load.
Over load Protection O/P protected against overlaod & short circuit. O/P resumes on reinput of AC.
Soft start Inrush current limited to 30A at 230VAC.
Efficiency 80% typical.
Operating Temp. 55 deg. centigrade ambient.
Noise Isolation 2.5KV pulse of 100 ns width at 2.5khz for 1 min Isolation on all line neutral and earth both +ve and -ve.
MODEL
NO. OF O/P
CURRENT
TOTAL POWER
SIZE mm (LxBxH)
REMARK
1

5 V
12 V
-12 V

2.5 A
0.3 A
0.3 A
20 W
140 x 60 x 20 OPEN PCB
2
5 V
24 V
3.0 A
1.0 A
40 W
180 x 70 x 45 OPEN PCB
3
5 V
12 V
30 V
3.5 A
1.0 A
0.5 A
40 W
190 x 65 x 45 OPEN PCB
4
24 V
OR 48 V
2.0 A
1.0 A
50 W
140 x 100 x 50 MS BOX WALL MOUNTING TYPE
5
5 V
30 A
150 W
130 x 200 x 90 TABLE TOP
6
5 V
12 V
-12 V
-5 V

20 A
7 A
0.5 A
0.5 A

200 W
150 x 150 x 85 MS BOX WALL MOUNTING TYPE FORCED AIR COOLED
7
24 V
6 A
150 W
150 x 150 x 85
OR 250 x 115 x 115
MS BOX WALL MOUNTING TYPE FORCED AIR COOLED
8
24 V
10 A
240 W
150 x 150 x 85 MS BOX WALL MOUNTING TYPE FORCED AIR COOLED
9
24 V
20 A
500 W
215 x 115 x 175

MS BOX WALL MOUNTING TYPE FORCED AIR COOLED

10
24 V
5 V
12 V
- 12 V

20 A
8 A
0.5 A
0.5 A

600 W
275 x 120 x 120 FORCED AIR COOLED 5 U RACK