SPECIFICATIONS
:
A) PC :
a) Pentium
b) 32 MB RAM, 104 key keyboard
c) 1.44 MB Floppy Drive, 4.3 GB Hard Disk
d) VGA, Colour Monitor
e) 80 / 132 column dot matrix printer
f) 1 Prallel, 2 Serial ports for communication
g) 1 Mouse
B) ADC Card :
a) Successive Approximation 12 bit ADC speed 33 µsec/reading (Faster
versions available).
b) 16 Analog input channels, can be configured as 8 differential channels
also. Expandable up to 256 channels.
c) 16 Digital input & output channels which are opto-isolated.
d) Digital outputs - Open collector, sinking capacity 50mA.
e) Analog outputs - 0 to 5V, can be converted to 4 to 20mA.
f) ADC range : Software selectable
Bipolar
|
Unipolar
|
+1
to -1V
|
0
to 2V
|
+2
to -2V
|
0
to 5V
|
+5
to -5V
|
0
to 10V
|
+10
to -10V
|
----
|
Accuracy : ±0.05% on all ranges.
Linearisation :
a) Software selectable for standard sensors like PT100, Thermocouple etc.
b) User can define his own linearisation formula.
C)
Available interface cards for :
Temperature : i) Thermocouple ii) PT100 iii) Semiconductor
Pressure : i) Strain Gauge, Load cells ii) Piezoceramic Transducers
Displacement : i) LVDT
Current : i) AC - Current Transformer & amplifier / attenuator cards
ii) DC - Shunt & amplifiers
Voltage : i) AC - Isolation Transformers ii) DC - Attenuators and
amplifiers
Humidity : i) Humidity sensors
PH : i) PH sensors and high input impedance amplifiers
D)
Software :
a) Menu driven, user programmable software. User can configure his own programmes
for his applications.
b) Custom built software specifically written for the particular application.
c) Language - Turbo C
E) Electrical : Working Voltage - 240 V AC, 1ø, 50Hz, 200VA
F) Mechanical : Dimensions (Interface Module) - 5U, 19" DINRACK, 200 mm Depth.
ENVIRONMENTAL
:
Working Temperature Range : 0 to 55°c, 80% R.H. Storage Temperature Range
: 0 to 60°c, 95% R.H.